Mother's Day Tins

Sometimes we just need something quick and easy for Mother's Day!
I decided to try some upcycled tins.

What you will need:
Empty containers - I used a bread crumb tin and a wilton meringue tin
Decorative wrapping paper or scrapbook paper
Charms or Embellishments
Scissors
Ruler
Tape
Hot Glue

First you will need to figure out the size of your container, either by measuring it or using the wrapper off the container for a pattern.

Next, cut and glue the paper to the container.

Then if you want to add additional paper or trim, cut and glue or tape it to the container also.

Now, for the final touch.  Add any charms or embellishments that you would like.

Finally. fill with, candies, treats, jewelry, flowers or a love note!  The possibilities are endless.

Thanks for stopping by!


Be sure to check out these fun link up parties!
Share It One More Time Saturday
Show Me Saturday
DIY Sunday Showcase
Frugal Crafty Home Blog Hop
Much Ado About Monday
Home Stories A to Z Link Party
Show and Tell Party
Inspire Me Monday
Mad Skills Link Party
Something to Talk About Link Party
Create, Link, Inspire
Lou Lou Girls Fabulous Party
Do Tell Tuesday
Totally Talented Tuesday
Too Cute Tuesday
VMG206 Brag About It
Worthwhile Wednesday
Creative Muster
Wow Me Wednesday
The Wednesday Round Up
Work It Wednesday
Create It Thursday
Share Your Cup Thursday
Lovely Little Link Party
Celebrate It Block Party
Flaunt It Friday
Link Party Palooza
Awesome Little Life
Friday Features Link Party
Creative Collections Link party

Vintage Moms

This post is dedicated to our vintage moms, and to the vintage moms we will become.

My own beautiful vintage mom turned 80 this last winter!  This pattern is from a set of vintage 40's or 50's transfer patterns that my aunt had.  I just love the designs!

You will need:
Chalkboard
Pattern
Transfer Paper
Stylus
Chalk marker
Chalk

I wanted to keep the design as original as possible, so I didn't alter the pattern.  I used the chalk markers because I want to keep it for awhile and I didn't want it to smudge.

First decide the position of your pattern.  Then place the transfer paper down with the chalk side of the transfer paper against the chalkboard and place your pattern on top.

Next, use your stylus to trace the pattern.

Then, trace over the chalk pattern with a chalkboard marker.

As you can see, I did my design in sections.

I just love the vintage look!

Thanks so much for stopping by!

Be sure to check out these fun link up parties!
Show Me Saturday
DIY Sunday Showcase
Share It One More Time Saturday
The Bouquet of TalentFound & Forged Link Party
Silver Pennies Sunday
Much Ado About Monday
Making Monday Link Party
Frugal Crafty Home Blog Hop
Something to Talk About
Show and Tell Party
Lou Lou Girls Fabulous Party
Tutorials & Tips Link Party
Create, Link, Inspire
Do Tell Tuesday
Totally Talented Tuesday
Roses of Inspiration
Creative Muster
Share Your Cup
The Wednesday Round Up
Moonlight and Mason Jars
Create It Thursday
Ladies Collective Link-up
Work It Wednesday
Lovely Little Link Party
Kitchen Fun & Crafty Friday Link
Celebrate It Block Party
Flaunt It Friday
Crafty Frenzy Friday
Link Party Palooza
Saturday Sparks
The Creative Collection Link Party

Mother's have many names...

I thought I would try a rustic Mother's Day project.

What you will need:
Wood pallet
Saw
Wood glue
Wood embellishment
Paint
Faux glaze
Sand paper
Stencil
Burlap ribbon
E6000
Picture clip
Paint brushes
Rag

First, cut the boards from the wood pallet to the length you prefer.  I cut my 14 inches long.

Next, you will want to fasten the pieces of wood together.  I was going to glue mine together, but my handy husband suggested something a bit more sturdy.  He used his pocket hole jig to screw the boards together.

I used my cricut to cut a bunch of patterns with different variations of the word 'mother', such as mom, mommy, etc.   A cricut is not required, any stencil will work for this.

Stick the stencils to the boards and paint in the letters.

After the paint has dried, remove the stencil and it should look something like this:

I choose to paint my wood rosette a rosy pink, because it seemed motherly.

After the paint has dried, sand it a bit.

I wanted my rosette to look a bit more rustic, so I added a layer of tinted faux glaze. (I mixed the clear faux glaze with brown acrylic paint)  When you brush on the glaze, just kind of brush it over the top, wait a minute or so, and wipe it off.  If you get it deep in the grooves, it is really hard to wipe out, but you may like that look.  If so, go with it!

After it dried, I decided I wanted it to shine a bit, so I sprayed it with Krylon Clear Coat.  If you want a duller finish, skip this step.

Next, decide where to glue the rosette on and use some wood glue to fasten it down.

Next, drill holes in the board were you want your burlap ribbon to go through.  Roll the ribbon up so it will fit through the hole, thread it through and tie a knot.  I threaded mine through from the backside so the knot is on the front side.

Lastly, attach your picture clip with E600 and add a cute picture of your kiddos, and you are done!

What would your mother's day project be?

Thanks for stopping by!

Be sure to check out these fun link up parties!

Share it one more time Saturday
Silver Pennies Sundays
Much Ado About Monday
Frugal Crafty Home Blog Hop
Made By You Monday
Mad Skills PartySomething To Talk About
Show & Tell Link Party
Tutorials & Tips Link Party
Your Gonna Love It
Lou Lou Girls Fabulous Party
Do Tell Tuesday
Totally Talented Tuesday
Creative Muster
Roses of Inspiration Link Party
Share Your Cup Thursday
Thursday Favorite Things
Work It Wednesday
Lovely Little Link Party
Kitchen Fun & Crafty Friday Link
Friday Favorites Link PartyFriday Flash Blog
Awesome Little Life
Saturday Sparks

This is for the birds!

There is something about birds that seems calming.

What you will need:
Old cabinet door
MDF chalkboard
Wood scroll or embellishment
Wood Glue
Paint - 2 colors
Tape Measure
Sandpaper

First you will want to measure and find the middle of the cabinet door.

Next, glue your scroll to the cabinet door and let it dry.  I like to put it right in the middle, but other placements would look good to.

Now, it is time to paint.  I like to paint a light coat of brown or grey as a base coat, then add a few coats of yellow paint and sand it to give it an antique look.  You can also use a faux glaze over yellow chalk pant if you prefer, but I like to use regular spray paint when it is something I will be handling quite a bit.

Next, spray a few coats of yellow paint.

You will want to wait for several hours before you sand, so the paint has so time to cure.
Next, cut your mdf chalkboard to fit your frame and attach it - I had my hubby use his air stapler to fasten the mdf to the frame.

Here is a picture of several chalkboards I made before I added a design.

After you have sanded it to your liking, let your creative juices flow and add a chalkboard design. You can use my chalkboard tutorial Here if you like.
What would be calming to you?

Thanks for stopping by!

Be sure to check out these Link Up Parties!

Busy Monday
Frugal Crafty Home Blog Hop
Monday Funday
That DIY Party
Something to Talk About
Mad Skills Link Party
Share Your Cup Thursday
Thursday Favorite Things
Lovely Little Link Party
Kitchen Fun and Crafty Friday Link Party
Friday Favorites
Celebrate It Block Party
Share it one more time Saturday
Flaunt It Friday
Show & Tell Link Party
Tutorials & Tips Link Party
Your Gonna Love It
Lou Lou Girls Fabulous Party
Due Tell Tuesday
Totally Talented Tuesday
Creative Muster
Link Party Palooza
The Creative Collection Link Party